Ford F-150 Truck Tool Box Installation And Review Videos

UWS Deep Angled Truck Bed Toolbox Review - 2020 Ford F-150- Video

What's up everybody, it's AJ with etrailer.com. Today we're going to be checking out this UWS low-profile crossover design toolbox on our 2020 Ford F-150. Right away, I want to explain the low-profile design. That means the top of the box is only going to add a little bit to the top of your bed rail. So this one's about three inches, is what it adds. If you look at the back window on your F-150 you can see it's still underneath the headrest, so it's not going to impede any of your vision when you're looking out that rear view mirror. more

Watch Video

6/19/2022 3:48:57 PM

UWS Crossover Style Truck Bed Toolbox Review - 2020 Ford F-150- Video

What's up everybody It's AJ with etrailer.com. Today, we're gonna be checking out this UWS Truck Bed Toolbox, it's gonna be a low-profile design with a crossover style as well, and we're putting it on this 2020 Ford F-150. Let's check it out. I wanna explain why I talked about the low-profile design, it's gonna be what the box adds to the top of your truck bed rails, it's gonna be about three inches it's gonna add, and if you look through the back glass of the F-150, you can see it's underneath the seat and the headrest, so it's not gonna impede your view in the rear view mirror at all. Now, for the crossover design, that's gonna be this gap here underneath the box, it means the box doesn't go all the way down to the bed of the truck, so there's room to throw a cargo and slide it in here and still close the tailgate, that way, you don't sacrifice your whole bed by putting a toolbox in there. Now, where this one measures out, it's gonna be about 9 1/2 inches of space there, because we have a bed mat in the truck, so it's taken up a little bit of that space. more

Watch Video

6/19/2022 2:21:55 PM

UWS Truck Bed Toolbox Review - 2020 Ford F-150- Video

What's up everybody It's AJ with etrailer.com. Today, we're gonna be checking out this UWS Toolbox, and that's gonna be a crossover style and low profile, and then we're gonna put it in our 2020 Ford F-150. By the way, I'm gonna explain what I meant by the low profile, it means it's only gonna come up about three inches from your bed rails, which means if you look at the backseat, it's still under the seat and the headrest, so it's not gonna impede your vision in the rear view mirror, and if you look down, crossover style means the toolbox didn't go all the way down to the truck bed, that means you can still fit objects underneath here and close the tailgate, so you don't sacrifice your whole bed by putting a toolbox in. The space down here is gonna be 9 3/4 inches, and now that is with a truck bed mat in there that's taken up quite a bit of space there, so it's gonna take away from that gap, but that's still plenty of room to fit a ladder or some lumber under here and still use your truck bed. We're gonna have two latches, there's gonna be one on the driver's side, one on the passenger's side. The one on the driver's side actually locks up, so you can lock up all your tools when you're not around. more

Watch Video

6/19/2022 9:12:15 AM

DeeZee Toolbox Review - 2016 Ford F-150- Video

Today on this 2016 Ford F150, we are going to be test fitting the DZ Red Label Truck Bed Toolbox, part number DZ8537. This has 6.4 cubic feet of space and it, unlike other truck bed toolboxes, this actually sits below the truck bed, so it has a nice, sleek look to it and you can't actually see the tool box itself while you're standing outside the truck. It does have one panel handle here to open up the toolbox itself, and it does lock for anti-theft. Once it's unlocked, just lift up. You take a look inside here, you see all the space that you have for your tools, tool bags, whatever you need for the job site, plus it has this tray here for your smaller items to keep it separate from large tools, which is removable and adjustable. Now you can just leave this in here with all the tools in it. You don't have to necessarily latch it down, however, you can also drill four holes in all corners and get some bolts and washers and nuts to actually tighten it down and anchor it to your truck, which I would recommend with a truck bed with a bed liner in it because this will be sliding around with all of the plastic. This does measure 37 and 1/8 inches long by 19 inches wide by 15 and 9/10 inches tall. There you have it for the DZ Red Label Truck Bed Toolbox, part number DZ8537 on our 2016 Ford F160. more

Watch Video

2/29/2016 9:15:29 AM

DeeZee Toolbox Review - 2016 Ford F-150 dz8170l- Video

Today on this 2016 Ford F150, we're going to be test fitting the DZ Red Label Truck Bed Toolbox, part number DZ8170L. This is the aluminium style here, and it has about 8 cubic feet of space for storage. Let's go ahead and show off some features. Now, it has 2 paddle handles here that you can open up to get to your box. It also comes with a lock on one side. When it's turned you can't get it. more

Watch Video

2/29/2016 9:15:14 AM

DeeZee Toolbox Review - 2005 Ford F-150- Video

Today our 2005 F150 Super Cab, we will be doing a test for the DeeZee red label low profile truck bed tool box. That's part number DZ8170L. Its also available in black, part number DZ8170LB. So, the dimensions of this low profile toolbox is going to be 69 and 3/4 inches long by 20 inches wide by 12 and 3/8 inches tall. That's going to be of usable space inside the toolbox. So to begin our test fit, you can see I've already got it in the back of my truck bed here. Its not a bad idea to get an extra set of hands to lift it onto your rails, or even into the back of your truck here. more

Watch Video

6/1/2015 9:56:06 AM

UWS Crossover Toolbox Review - 2013 Ford F-150- Video